Welcome to Sunrise Refractory
Glass Mould Brick

With the development of the world automobile industry in recent years, the technology on the rearview mirror is also greatly improved, as demands a higher request on mold bricks in terms of its performance and quality. We have been working on the research and development. of Mold Bricks since 2000, and in March 2003 success was achieved in the trial manufacture, in Sep 2003 a Mold Brick production line was established, and we are now a factory specialized on Mold Brick for Viewing Mirrors. There have three types of mold block: soft Ceramic mold block (M4A-10), Soft ceramic mold block(SL-50), and Hard ceramic mold brick (SY-30).


Mold Bricks Characterize As Follows

1. Low permanent linear change on reheating
Firing under the temperature of 1050 Degree. Ensures no distortion and no permanent linear change on the old bricks.
2. High dense structure
Mold Brick is manufactured from micron grade material, which is pressed molding following being mixed by a high-speed blender. The maximum rod is 1000 with an extremely fine section structure.
3. Good Thermal Shock Stability.
No cracks even chap would be happening after long service of the bricks
4. Easy to be machined
The Mold Brick is manufactured based on the customer’s request, which avoids waste from cutting the big blocks.
We have established good fame among our customers since our mold brick line was put into production with some performances superior to similar products available in the market.

The mold bricks could also be used in thermal bending glass, thermal melting glass, and art glass. We sincerely welcome the comments from all our customers.
Besides the specifications as listed above we meet your satisfaction based on customer requests, any problem don’t hesitate to contact us.

MD Product Dimension List (Standard Size )

No. L(mm) W(mm) H(mm)
1 450 250 25-150
2 450 320 25-150
3 300 300 25-150
4 380 300 25-150
5 510 270 25-150
6 510 510 25-150
7 440 360 25-150
8 600 480 25-150
9 500 380 25-150

Note: the size and curvature could be produced following customers’ drawings.

Inquiry:

*
*
Please Choose:
*
Name * E-mail *
Tel Country Message *
x