Welcome to Sunrise Refractory
Fused Cast AZS TY-AZS36

Fused Cast AZS TY-AZS36What’s Fused Cast

The term Fused Cast refers to a manufacturing process in which the ceramic bonding is obtained by the solidification of a mixture which has been melted in an electric furnace and cast in liquid state into molds.


Fused Cast AZS TY-AZS36

►Advantages
♦ Compact microstructure
♦ Good erosion resistibility to molten glass
♦ Good thermal shock resistibility
♦ Barely rendering blister

►TY- AZS36 Shapes and sizes

This product is only available for straight brick.
Application: Mainly used for sidewalls of flame furnaces with embedded melter bottoms, for total security with average pulls and campaign lengths, and superstructures, front wall, back wall, top crown in glass melting furnace.

►Application

Mainly used for sidewalls, doghouses, throat, bottom budding, Dam blocks, electric block corners.
Fused Cast AZS are the most widely used materials both in glass contact and superstructure of glass melting furnaces.
The products have passed the ISO international certified, are made of high pure material, fired at high temperature by advanced technology, with the advantages of high strength, high compression resistance, good thermal shock resistance, good performance in high temperature, good thermal conductivity, good erosion resistance and so on. Widely be used for linings of furnace in industries.

fused-cast-azs-yt-azs36-7

Technical Data

Item Behaviors
TY-AZS36
Chemical Composition Al2O3 ≥49.00
ZrO2 ≥35.50
SiO2 ≤13.50
Na2O+K2O ≤1.35
Bulk density g/cm3 ≥3.85
Apparent Porosity % ≤1.0
Cold Crushing Strength Mpa ≥300
Exudation Temperature of Glass Phase ≥1400
Bubble Separation Ratio(1300℃×10h) ≤1.4
Anti-corrosion rate of glass liquid 1500℃×36h (mm/24h)% ≤1.3
Apparent density (g/cm3) PT(RN RC N) ≥3.50
ZWS(RR EVF EC ENC) ≥3.70
WS( RT VF EPIC FVP DCL) ≥3.80

Inquiry:

*
*
Please Choose:
*
Name * E-mail *
Tel Country Message *
x